Cabinet Painting
Sarasota
For Sarasota homeowners, cabinet painting begins with an in-home inspection, a prep plan, and a written price. Refresh kitchen cabinets, a bathroom vanity, a bar, or a built-in without replacing sound boxes. Components are labeled before removal, then degreased, sanded, primed, and sprayed with Renner or Milesi 2K polyurethane. The catalyst-cured coating resists moisture, grease, and daily wear. The kitchen is out of service for 2 to 3 days, not the 1 to 2 months a full replacement takes.
Book Your Walkthrough
Short form. We respond quickly and follow up with a written proposal after the visit.
We never sell your information.
Sarasota, FL Cabinet Painting Services Backed by Desmond's 20+ Years
Cabinet refinishing keeps the sound boxes you already own and renews every visible face with sprayed Renner or Milesi 2K polyurethane. The documented sequence is substrate check, grease removal, HEPA sanding, adhesion primer, controlled spraying, cure, then careful reinstallation. Desmond Landry has more than 20 years of painting experience and still runs the walkthroughs. You get a fixed written price and a 10 year written workmanship warranty on the documented 2K cabinet system.
Refacing, Replacing, or Refinishing and Painting
Refinishing fits when the boxes are sound and the layout already works: it changes the surface, not the room plan or the door style, and it typically runs 50-70% less than replacement. Refacing keeps the boxes but adds new fronts and veneer. Replacement pulls the full run, which makes sense when damage or a layout change rules refinishing out. Substrate decides the prep in a Florida kitchen. Wood and MDF take the 2K cabinet system after cleaning, sanding, and primer. Thermofoil with lifting edges, water-swollen panels, and stripped hinge holes has to be repaired first, priced into the scope. Open-grain oak may need grain filling for a smoother face. All of it is documented before work begins.
Homeowners call this work painting, cabinet painting, cabinet refinishing, cabinet refacing, or simply a refresh, and the words get mixed up. What matters is the process. Here, refinishing and painting both mean prep, a sprayed 2K coating, and a full cure. Refacing is different because it adds new fronts. Review the cabinet painter comparison, browse more Sarasota services, open the vanity planning guide for a smaller room, or read how cabinet coatings differ.
Still comparing cabinet painters in Sarasota? That guide lists what to check before you sign with anyone. Ask whoever quotes your kitchen which coating they spray, how long it cures, and what the written scope covers.
How the Process Runs
Your project follows a documented sequence from walkthrough to final review. The process is the same for every cabinet painting project, from one vanity to a large island. Production usually takes 5 to 10 business days, with the kitchen unavailable for 2 or 3 of them. Scheduling is confirmed in your written scope.
Color Consultation at Home and a Project Plan
Each cabinet and trim piece is checked for wood, MDF, thermofoil, damage, and hinge condition. You choose one color and review a full-size sample in your own light. Custom cabinet colors are sampled the same way. The written scope records repairs, sheen options, the coating plan, and the fixed price before anything is removed.
Clean, Prep, and Use the Product
Doors and drawer fronts are indexed to a hardware map. Each face is degreased, HEPA sanded, and primed to ensure adhesion before Renner or Milesi 2K polyurethane is sprayed in a controlled setup. The spray space is set up with nearby surfaces covered and HEPA dust control throughout. Spraying leaves a level film instead of brush marks or roller stipple.
Cure, Reinstall, and Check Every Detail
The coating cures on its specified schedule before each piece is rehung and adjusted. Sets of doors return to their mapped positions, so the finished run lines up. A final review checks each detail and the coating quality on every face. The closeout packet records the product, sheen, and care notes for the 2K cabinet system, so a future touch-up matches.
Recent Cabinet Projects, Sprayed and Cured
Custom Cabinet Services and Pricing
Cabinet services are priced after an in-home walkthrough, so the written scope covers prep, protection, and coating choices before anything is removed. A Primary Scope is returned as a Written Proposal covering prep, coatings, protection, staging, and cleanup matched to what you approved. A Detailed Scope is returned as an Itemized Proposal when the kitchen requires expanded repair, access planning, or extra coordination. The $1,500 project minimum applies. Cabinet painting services cover the whole scope, including hardware changes, reinstallation, and closeout notes.
Exact pricing requires an in-person walkthrough.
Our 4 Core Guarantees
Zero Mess Guarantee
Your home stays spotless every day. No paint drips, no overspray, no debris. We clean up completely before we leave.
Fixed-Price Promise
100% fixed pricing with zero hidden costs. The price we quote is the price you pay - guaranteed in writing.
Quality Inspection
Full walkthrough inspection before final payment. Any issues found are fixed right away.
Premium Materials
Coatings come from Sherwin-Williams Duration or Emerald, Benjamin Moore Aura, or Renner/Milesi. No bargain-grade substitutes.
Questions to Ask a Local Painting Company
Can I Refinish Without Replacing?
Cabinet refinishing typically costs 50-70% less than full replacement. When the boxes are sound and the layout works, you refinish instead of tearing out a usable run. Most kitchen projects run $3,500 to $7,500 based on component count, condition, coating choice, and hardware changes. Replacement is the better fit when the boxes are failing or the layout has to change.
What Does Kitchen Cabinet Work Cost?
Most kitchen scopes run $3,500 to $7,500. The number depends on component count, substrate, repairs, hardware changes, and coating complexity. An on-site walkthrough is required so the written price reflects the actual kitchen instead of a phone guess.
Which Paint Finishes Hold Up in Florida?
Refinishing here means sprayed Renner or Milesi 2K polyurethane, which resists moisture and grease. The coating needs its full cure window, and prep cannot be skipped. Grease removal, sanding, adhesion primer, and controlled spraying are what make the finish last.
Which Doors Need Repair?
Thermofoil with lifting edges, water-swollen panels, delamination, and stripped hinge holes has to be repaired before coating. Oak keeps visible grain unless grain filling is included. The walkthrough confirms whether each door can be coated as planned or has to be fixed first in the written scope.
How Many Days Does the Service Take?
Scheduling is confirmed after the on-site walkthrough and the written proposal. That proposal gives you the production window, the kitchen-access plan, and the fixed price before anything is removed. The room is back in use after 2 to 3 days of downtime.
Which Products Go on the Cabinets?
Cabinet painting depends on substrate checks, labeled hardware mapping, grease removal, HEPA sanding, adhesion primer, controlled spraying, curing, reinstallation, and closeout documentation. The coating is Renner or Milesi 2K polyurethane.
How Do I Call or Schedule a Free Estimate?
Call (941) 504-3552 today or send the form. The free estimate visit is booked for a time that suits you. Someone confirms the property address and books the on-site visit. After the walkthrough, the written proposal shows the scope and the fixed price before anything is removed.
Do You Refinish Bathroom Cabinets Too?
Yes. A single proposal can list more than one room of cabinet painting: bathroom cabinet painting, kitchen cabinet painting, bars, and built-ins. Vanities see steam and splashes, so the moisture resistance of 2K polyurethane matters there as much as near a sink. Bathroom cabinets get the same prep and coating as any other painted cabinetry.
Which Colors Look Right in a Kitchen?
The best color depends on your light, your counters, and your floor. We offer color consultation at the walkthrough, and you review a full-size sample before you commit. White and off-white are common choices, but custom colors go through the same steps. Looking at the sample in morning and evening light shows how the look will read.
Is Venice or Lakewood Ranch in the Area?
Yes. Grove Street Painting handles cabinets, vanities, and built-in painting in Sarasota and South Sarasota, FL. Cabinet painting jobs in Venice, Nokomis, Osprey, Lakewood Ranch, and Bradenton follow the same process and the same written price terms. The local area served reaches north into Manatee County.
Why Choose a Professional Over a Full Replacement?
New cabinets mean a teardown and a room torn out for 1 to 2 months. Professional cabinet painting keeps the sound boxes and changes the look in a 5 to 10 workday production window. Outdated oak or tired paint is a surface problem. The difference is the prep and the coating, since brushed latex and a sprayed 2K film do not give the same results. When prep is done right, the coating holds up to daily wear. If the layout works for you now, we recommend keeping it and the boxes you already have.
How Hard Is a New Finish?
Renner and Milesi 2K polyurethane is a two-component, catalyst-cured coating that forms a hard, durable film. Once the cure is completed, it resists moisture, grease, and daily cleaning. Cabinet faces should still be handled gently until the full cure window ends. In Gulf Coast humidity, that film is what keeps water out, and the closeout packet has care notes you can use.
Who Are the Cabinet Painters on the Job?
Desmond Landry owns the painting company and still runs the walkthroughs. Beyond cabinet painting, interior painting and exterior painting are also offered. Each team member is background-checked and trained on PCA prep standards before working in a client's home. The written proposal will provide the products and the schedule, so you know what happens each day.
Free Kitchen Refinishing Cost Guide
Full kitchen cabinet refinish, from $3,500
$1,500 minimum job size to book. We advise combining services to meet the minimum and get the most value.
- Per-cabinet pricing for oak, MDF, and shaker doors
- Booth spraying vs on-site spraying costs
- Hardware change, grain-fill, and two-tone premiums
- Timeline for doors off, doors back
4.9 stars from 73 reviews. Owner-operated painting estimates.
We'll email your free guide within minutes. No spam. Unsubscribe anytime.
Ready to Love Your Home Again?
Start with an in-person walkthrough, then get a fixed written quote for the work you approve.
Also Serving
the Gulf Coast
Pick your city to see service details and pricing.