Can you paint brick or stucco on the outside of a house in Sarasota?

Yes, both brick and stucco can be painted on Sarasota homes when the surfaces are properly prepared. Grove Street Painting uses masonry-specific primers and elastomeric topcoats designed to handle Florida's heat expansion cycles, salt air corrosion, and moisture intrusion without peeling or blistering.

For stucco, our process begins with pressure washing at 2,500-3,000 PSI to remove mildew, dirt, and loose material. We then repair any cracks wider than 1/16 inch with elastomeric patching compound. After 48-72 hours of dry time, we apply a masonry bonding primer followed by two coats of 100% acrylic elastomeric paint. This coating system bridges hairline thermal cracks that develop naturally in Florida's temperature swings.

For brick, the preparation is similar but includes an alkalinity test. New or recently repaired brick can have high pH levels that cause paint adhesion failure. We test the surface, allow adequate cure time (at least 28 days for new mortar), and apply a breathable masonry primer that lets moisture vapor escape without trapping it behind the paint film. Trapped moisture is the number one cause of brick paint failure in humid climates.

Both surfaces benefit from products rated for Gulf Coast conditions. Explore our exterior painting process for substrate-specific details, or review our stucco repair services if your walls need patching before painting.